[Dystrakti0n]

I am having a heck of a time finding a replacement for the Trans relay. It’s stamped with 150-65 150-905 12V date code is 8914. Pins 1-> 2 reads 0.02 ohms, and when it was plugged in, all spades were reading 13.4v to ground. Any idea on where to find a cross where I don’t have to rewire/remap the circuit?

I’m about to pull one of the “non-essential “ relays to get to town to dump and get propane.         

[Richard]

A number of years ago, one of our members sourced those ‘can’ relays from NAPA.

Most just use a modern Bosch cube relay with the screw tab on top. For example https://www.summitracing.com/parts/bch-0...pwEALw_wcB