[[email protected]]

So I just completed repair on one of my bay doors. I went the Richard inspired route and adhered the door with Thixo. 

Anyway here is an advance sneak peek at the video that will be public on Saturday:

https://youtu.be/iEZWo5i1QOI?si=Ffa6n7uCnKJ4w1fe

Please critique if you will as I have all the bay doors to do and anything I can do to improve the process is welcomed.

[Richard]

Hmmmmm, it will not play for me.

[[email protected]]

Hmmmmm, it will not play for me.

Still learning the intricacies of youtube. I have changed its visibility, it should work now for you.

[Jack Houpe]

Good video Jeff, you might try using a DeWalt multi-tool with a flat blade. It takes that 3m double sticky off tapeoff the metal in the blink of an eye.

[Richard]

3M Adhesive remover for the tape removal.

Good mention on using the spacer, I learned the spacer was absolutely essential for the epoxy bond to hold over time.

Add a fillet of epoxy, especially at the corners, between the door skin and the frame.

[[email protected]]

Good video Jeff, you might try using a DeWalt multi-tool with a flat blade. It takes that 3m double sticky off tapeoff the metal in the blink of an eye.

Thanks Jack, a reason for me to get one. Believe it or not I do not have a mult-tool yet. Mine will be a red version, since I have all the batteries already.

---

3M Adhesive remover for the tape removal.

Good mention on using the spacer, I learned the spacer was absolutely essential for the epoxy bond to hold over time.

Add a fillet of epoxy, especially at the corners, between the door skin and the frame.

Thanks Richard, I will look into the 3M adhesive remover. Good idea on reinforcing the corners with a fillet of epoxy. 
Yea the spacer is definitely a good idea, makes it easy to get a uniform gap.