[TJ Clark]

Thanks Bill

[pairodice]

I read through this but don’t see a link to the bulbs being used - please send and let me know if these fit in the original frame or do I need to download a file from somewhere?

[bikestuff]

The original “bulbs” are not readily available. The new lights are an entire replacement of all the individual light units AND the bezels.

The idea was to use more readily available light units. These are LED and WILL NOT fit with existing bezels.

Hope this helps.

Bill

[markkitch]

Hi guys, 

I upgraded my taillights, I had done the same to my wanderlodge. I have the dwg/step file for the aluminum bracket which I am happy to give to anyone wanting to do the same. You can get these cut and powder coated for around $160 - $200 for the pair from any of the online metal cutting guys. I purchased bulbs on Amazon:
https://www.amazon.com/dp/B0F9TX8CTT?ref...title&th=1
https://www.amazon.com/dp/B0F9TWVDS1?ref...title&th=1

Should anyone need them, I removed my old lights and metal brackets, all work. Message me if you want them.

[chadsuv]

Hi guys, 

I upgraded my taillights, I had done the same to my wanderlodge. I have the dwg/step file for the aluminum bracket which I am happy to give to anyone wanting to do the same. You can get these cut and powder coated for around $160 - $200 for the pair from any of the online metal cutting guys. I purchased bulbs on Amazon:
https://www.amazon.com/dp/B0F9TX8CTT?ref...title&th=1
https://www.amazon.com/dp/B0F9TWVDS1?ref...title&th=1

Should anyone need them, I removed my old lights and metal brackets, all work. Message me if you want them.

Mark, Would you mind sharing the file for the aluminum bracket? I'd like to upgrade the lights on coach #485.