1 hour ago
Our UK friend, you are in luck. First the factory that made the front end was in the UK, and according to my conversation with a DANA rep, razed in 2012. Translation no new parts.
However, the center tie rod has an adjustment in both ball joints. Measure the joint to joint distance for reassembly. Now unscrew both ends. One is left threaded. Peer inside the threaded section and you will discover a cross. Remove the cotter pin from the outside, and use a BIG screwdriver to adjust to you desired tightness.
However, the center tie rod has an adjustment in both ball joints. Measure the joint to joint distance for reassembly. Now unscrew both ends. One is left threaded. Peer inside the threaded section and you will discover a cross. Remove the cotter pin from the outside, and use a BIG screwdriver to adjust to you desired tightness.
Richard and Rhonda Entrekin
95 Newell, 390 Ex caretaker
99 Newell, 512 Ex caretaker
07 Prevost Marathon, 1025
Maverick Hybrid Toad
Inverness, FL (when we're home
)