02-11-2019, 08:31 PM
no diagrams and dont expect to find one anywhere.
i used gel superglue to hold them down and you should see where it was glued previously.
you can also look at there the sensor is on the inside where the slide pin mechanism is to see where they should go.
if that magnet is off, the pins will not go down. there should be a magnet on each slide pin hole on the slide. both have to be aligned for the pins to go down
tom
i used gel superglue to hold them down and you should see where it was glued previously.
you can also look at there the sensor is on the inside where the slide pin mechanism is to see where they should go.
if that magnet is off, the pins will not go down. there should be a magnet on each slide pin hole on the slide. both have to be aligned for the pins to go down
tom
2014 Haulmark 40' Super C on Freightliner Cascadia ISX15 Easton 13 speed
Former Owner 1990 38' Newell Coach 236 8V92
Former Owner 1999 45'8" Newell Coach 526 Series 60
Former Owner 2002 45'8" Newell Coach 608 Series 60