You are not logged in or registered. Please login or register to use the full functionality of this board...


Prosine 3.0 issues
#3

hi,

i have the prosine 3.0 as well. you should do what was first siad. completely disconnect the power from it. both power and ground. you cannot just turn the switch off at the battery. the inverter is still connected with the switch off

that has reset several issues i have had.

you are correct that no one will not work on it. that said, i have taken mine apart and done some repairs. it is not for the faint hearted. mine was overheating and i saw the 3 internal fans were all not working. i replaced them (about ten bucks apiece) and all was well.

tom

2014 Haulmark 40' Super C on Freightliner Cascadia ISX15 Easton 13 speed

Former Owner 1990 38' Newell Coach 236   8V92 
Former Owner 1999 45'8" Newell Coach 526  Series 60
Former Owner 2002 45'8" Newell Coach 608 Series 60
Reply


Messages In This Thread
Prosine 3.0 issues - by bryguymi - 02-06-2018, 10:47 AM
RE: Prosine 3.0 issues - by ccjohnson - 02-06-2018, 11:11 AM
RE: Prosine 3.0 issues - by encantotom - 02-06-2018, 01:59 PM
RE: Prosine 3.0 issues - by bryguymi - 02-06-2018, 02:06 PM
RE: Prosine 3.0 issues - by bryguymi - 02-06-2018, 04:19 PM
RE: Prosine 3.0 issues - by encantotom - 02-06-2018, 04:45 PM
RE: Prosine 3.0 issues - by bryguymi - 02-06-2018, 04:52 PM
RE: Prosine 3.0 issues - by InfiLights - 02-07-2018, 06:54 AM
RE: Prosine 3.0 issues - by bryguymi - 02-09-2018, 03:40 PM
RE: Prosine 3.0 issues - by bikestuff - 02-09-2018, 04:59 PM
RE: Prosine 3.0 issues - by encantotom - 02-09-2018, 05:08 PM
RE: Prosine 3.0 issues - by encantotom - 10-30-2018, 01:26 PM
RE: Prosine 3.0 issues - by bikestuff - 10-30-2018, 02:19 PM
RE: Prosine 3.0 issues - by Richard - 10-30-2018, 03:10 PM
RE: Prosine 3.0 issues - by Nebster - 11-03-2018, 12:29 AM
RE: Prosine 3.0 issues - by encantotom - 11-03-2018, 09:16 AM
RE: Prosine 3.0 issues - by xGE_97 - 02-21-2020, 01:36 PM
RE: Prosine 3.0 issues - by encantotom - 02-21-2020, 02:33 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)