You are not logged in or registered. Please login or register to use the full functionality of this board...


Mold from leak
#10

i replaced all the windows in my 90 newell. it is not hard at all.

the trim ring on the inside is all that holds the window in other than the butyl tape.

you just take the ring off and have someone on the outside and gently push on the frame on the inside. clean the coach and the window up well and get some butyl in rolls and put it around, put the window back in and screw the trm ring back on. then use a plastic putty knife to get the butyl off on the outside. then i would tighten the screws on the trim ring every day for a couple of days to make sure it is sealed good.

tom

to

2014 Haulmark 40' Super C on Freightliner Cascadia ISX15 Easton 13 speed

Former Owner 1990 38' Newell Coach 236   8V92 
Former Owner 1999 45'8" Newell Coach 526  Series 60
Former Owner 2002 45'8" Newell Coach 608 Series 60
Reply


Messages In This Thread
Mold from leak - by pestes - 08-20-2017, 08:54 PM
RE: Mold from leak - by encantotom - 08-20-2017, 09:34 PM
RE: Mold from leak - by HoosierDaddy - 08-21-2017, 04:26 AM
RE: Mold from leak - by 77newell - 08-21-2017, 04:48 AM
RE: Mold from leak - by folivier - 08-21-2017, 05:17 AM
RE: Mold from leak - by HoosierDaddy - 08-21-2017, 05:25 AM
RE: Mold from leak - by folivier - 08-21-2017, 07:29 AM
RE: Mold from leak - by Richard - 08-21-2017, 12:39 PM
RE: Mold from leak - by pestes - 08-21-2017, 02:11 PM
RE: Mold from leak - by encantotom - 08-21-2017, 02:16 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)