Posts: 1,011
Threads: 64
Joined: Sep 2022
I read pictures far better than I read words. Thank you for always posting pictures.
1999 45' with tag axle, #504 "Magnolia"
Gravette, Arkansas
Posts: 413
Threads: 53
Joined: Jun 2022
Richard, they could be punched out easily with the right machine. I used some scrap metal, happened to be a piece of a ride height valve. I doubt there is a large market but perhaps the boating industry would make it worthwhile.
Thanks Jack, I'm following your lead on show & tell.
I get concerned when the pump seal doesn't allow the armature to turn. I wiggle it back & forth a little at a time to break it loose, always worried about causing damage to the seal.
Jim
2014 Newell Coach 1482 Mid Entry 45'8" Valid Slides and Valid Levelling