[Jackflash]

After getting the window out undamaged I had the two sheets laying on a sheet of paper on the kitchen island cleaning them when the cloth grabbed on the face of the outer sheet rotating it to the point that the corner struck the back edge of the inner sheet creating the slightest of nicks.  When I went to clean the inner sheet it shattered into a thousand pieces.  The inner sheet is 1/8" low-e tempered glass so I had to make a pattern and take it to Binswanger to have them cut the glass and send it to have it tempered, 4 days and $90 later I had a new sheet.  Yesterday I put them together and sealed the edge leaving it to cure overnight.  Came out pretty good for a first effort.        While cleaning the mating face of the frame (the stuff Storm-Tite mounts the glass with is really thick and extremely sticky) and trying to figure out how to reinstall the window I found that the exterior rubber trim can easily be pulled out of the slot it's mounted in.  Removing the trim made reinstalling the glass a straightforward process.        All I had to do is apply a bead of sealant, install glass and reinstall the rubber trim, easy-peasy.      I'll trim the squeeze out on the inside tomorrow after it cures.