[[email protected]]

Made some progress today.  We ordered a new beckett controller and I was able to install it this evening.  I'll have to do a little bit of rewiring because the wires on new unit are too short to reach all of the lugs on the terminal block, so it's just suspended with some zip ties, but we're back up and running!

I found that the old unit was supplying a constant 12v to the fuel solenoid, even with the the AH switched off, causing it to stay in the open position and continuously leak fuel.  So, fingers crossed, that will solve the diesel leak issue and so far there isn't any sign of a fuel leak. 

Thanks again for all the help!

Be prepared for some pretty good smoking when you fire it off for the first time. All that diesel in there will need to burn off then it should clear up.