01-16-2024, 08:52 PM
Amazon has them, but may NOT be the official SouthCo mold. Ask me how I found out!
The FOOT has been changed to a more ROBUST version. So, while I have a bunch of the "thinner" version which break when you look at them cross-eyed...I orded a bunch of the beefier molded feet which....of course....have a bit longer base and, hence, the screw slots won't match up. So, I dremel the screw slot on the foot a bit so I don't have to re-drill the base to which the foot gets mounted onto.
Also, take note that the majority of those feet are backed with VHB tape. This serves two purposes; one is distribute the holding power (to make the foot last longer) and, two, to act as a shim for height variances. I have as many as 3 layers for the reefer latches.
I'll show you the OLD thin version, and the new BEEFIER version.
Steve & Janice Vance
2015 Newell #1524
Glendora, CA