04-20-2023, 05:32 PM
Hi Richard
Measurements if you can get them easy will help. Otherwise I have to make a 45 minute drive to my hangar to measure one. What I am finding is lots of r22 115v compressors, but the btu’s are 12,000, 13,200, 13,315 Which I think is subjective to how the manufacturer rates them depending on a expected temperature of evaporator and pressures. I’m probably ok with anything at 1hp and a close current load to original units. Although the displacement of compressor could be a factor. My guess is it’s not worth fretting over so long as I’m close.
I did find a 13,315btu 11.2amp match in a Panasonic unit. But it’s backordered.
Measurements if you can get them easy will help. Otherwise I have to make a 45 minute drive to my hangar to measure one. What I am finding is lots of r22 115v compressors, but the btu’s are 12,000, 13,200, 13,315 Which I think is subjective to how the manufacturer rates them depending on a expected temperature of evaporator and pressures. I’m probably ok with anything at 1hp and a close current load to original units. Although the displacement of compressor could be a factor. My guess is it’s not worth fretting over so long as I’m close.
I did find a 13,315btu 11.2amp match in a Panasonic unit. But it’s backordered.
Terry & Cherie
95 Newell, 45', FMCA Show Coach, Series 60, Allison HT741 4spd, #373