07-04-2020, 01:22 PM
The air leak questions just keep coming. Mine is about removing the pressure from the 12V system so a repair can be made.
The leak is at a T just upstream of the dump valves port side water bay. Used the Whisper to isolate. There’s even a little dark stain where the air has been blowing against the bulkhead.
There’s supposed to be a valve near the left rear bag tank that isolates this circuit, but my coach does not appear to have it. Should I just turn off the compressors and let this circuit bleed down so I can make the repair? My brake/bag pressure and slide seals remain presssurized, so it seem the various check valves are working as intended.
Thanks!
Chuck
The leak is at a T just upstream of the dump valves port side water bay. Used the Whisper to isolate. There’s even a little dark stain where the air has been blowing against the bulkhead.
There’s supposed to be a valve near the left rear bag tank that isolates this circuit, but my coach does not appear to have it. Should I just turn off the compressors and let this circuit bleed down so I can make the repair? My brake/bag pressure and slide seals remain presssurized, so it seem the various check valves are working as intended.
Thanks!
Chuck
2001 #579 ("Chester's Coach")