2001 3 HWH slides - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Slides (https://newellgurus.com/forumdisplay.php?fid=55)
+--- Thread: 2001 3 HWH slides (/showthread.php?tid=5287)

---

2001 3 HWH slides - rheavn - 12-11-2019

Do you check the slide hydraulic tank with the slides open?  Closed? or some combination of the two?

---

RE: 2001 3 HWH slides - bestgenman - 12-11-2019

if i remember correctly, Creslie told me "with slide in".

---

RE: 2001 3 HWH slides - RussWhite - 12-11-2019

Slides in. Russ

---

RE: 2001 3 HWH slides - Richard - 12-11-2019

Slides in. If you fill it with slides out, it makes a big mess when you retract the slides. Dont ask how I know this.

---

RE: 2001 3 HWH slides - cknuth - 11-03-2020

I've randomly selected this thread out of the many ongoing slide discussions as I believe you folks have similar HWH systems. I'm in Mineral Wells, TX getting a new salon floor by Ernie/Brent Ekberg. Whilst we have everything apart, I'm wondering if there is any maintenance that should be done on the slides - lubrication, etc? Or is all that reached from the basement anyhow? There is one round hole in the subfloor that reveals a limit switch, and we plan to leave a loose board over it for continued access. Any notes or suggestions appreciated - thanks!
Chuck

---

RE: 2001 3 HWH slides - Richard - 11-03-2020

All reached from the basement. HWH slides ride on Delrin blocks so no lube required. Really not much I can think of that having the floor removed would help.

---

RE: 2001 3 HWH slides - cknuth - 11-03-2020

Thanks Richard, hearing it from you raises my confidence level.

---