The tag (tail) that wagged the dog. - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Suspension/Tires/Wheels (https://newellgurus.com/forumdisplay.php?fid=5)
+--- Thread: The tag (tail) that wagged the dog. (/showthread.php?tid=7264)

---

RE: The tag (tail) that wagged the dog. - WillieG - 02-23-2024

How do I print the Ridewell blueprints that are attached in this thread?

---

RE: The tag (tail) that wagged the dog. - Richard - 02-23-2024

I think there is more to your question. Cause printing is as simple as clicking on the link, and then printing from your computer. Are you opening on a Microsoft based product, android based product, or apple based product?

If your question is how do I print a larger than 8 1/2 by 11 copy…….then click and open the link, while it’s open, save the file to a thumb drive, take the thumb drive to an Office Depot, kinkos, or some other place with a large format printer.

---

RE: The tag (tail) that wagged the dog. - WillieG - 05-23-2024

I had the Tag axle bushings replaced along with a driver side wheel bearing and axle seals. The torque rod was good.Also had it aligned and wow what an improvement in holding a line on the interstate.When I picked it up last fall it seem I was constantly correcting with the steering wheel. Now I don’t even really think about it she just cruises down the road

---

RE: The tag (tail) that wagged the dog. - Jack Houpe - 05-24-2024

Glad it worked out for you Willie.

---

RE: The tag (tail) that wagged the dog. - Richard - 05-24-2024

Yeah, given the consistent feedback from others who have replaced both or either of the bushings and panhard bar, my position to any owner of a Ridewell suspension coach is JUST REPLACE BOTH. You can’t tell if the panhard rod is bad by visual inspection.

---