You are not logged in or registered. Please login or register to use the full functionality of this board...


Thank You Rudy
#5

Let me dogpile on Steve’s comment. I was aware that you have had to replace this motor a number of times. This winter, I dug into the same system because the motor was getting slow to start. I found exactly what Steve described, bronze bearings in the motor. They were all gunked up. Even though I had a new motor in the box, for grins I cleaned the old bushings up, put a bit of oil on the shaft, and it’s like new. I elected to reinstall the original rather than than the replacement I bought.

While I was working on mine, I wondered about the chronic failures you have had. I also think the motor is not designed to mount vertically now that I see the picture.

Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home Cool )
Reply


Messages In This Thread
Thank You Rudy - by rheavn - 03-21-2024, 04:03 AM
RE: Thank You Rudy - by Jack Houpe - 03-21-2024, 04:29 AM
RE: Thank You Rudy - by Trainer - 03-21-2024, 05:17 AM
RE: Thank You Rudy - by Latitude 28 - 03-21-2024, 05:31 AM
RE: Thank You Rudy - by Richard - 03-21-2024, 05:58 AM
RE: Thank You Rudy - by encantotom - 03-21-2024, 07:43 AM
RE: Thank You Rudy - by Trainer - 03-21-2024, 08:05 AM
RE: Thank You Rudy - by smagown - 03-21-2024, 09:12 AM
RE: Thank You Rudy - by TJ Clark - 03-22-2024, 07:24 AM
RE: Thank You Rudy - by rheavn - 03-23-2024, 06:06 PM

Forum Jump:


Users browsing this thread: 2 Guest(s)