You are not logged in or registered. Please login or register to use the full functionality of this board...


Aquahot reading LO on display
#1

Good afternoon,

Just returned from storage and noticed the Aquahot was reading LO on the inside display.  It is switched on electric and I am wondering what I should look for when checking?  Only have 30 amp service.

Thanks,
 B and C
2002 Newell #636

Brandi and Chris
Coach #636
Hot Springs Village, AR

Reply
#2

The big heating element in your AH is 240V.  The 30A shore power is 120V, it may come up to temp if the 120V 1600W element is working and so connected electrically.  Your diesel should bring the temp up if working correctly.

Gordon Jones
2000-45'-2slide-#567
Reply
#3

From ambient to full temp on the 120 vac element is 2 to 3 hours. The diesel burner will heat it up in 15 to 20 minutes max. Once the temp is high enough, the meter will read in degrees.

Rudy Legett
2003 Foretravel U320 4010
ISM11 450 hp Allison 4000R
Factory Authorized Aqua Hot Repair Center
Southeast Texas Area
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)