05-05-2024, 07:12 AM
[attachment=13743 Wrote:jdkskyking pid='64701' dateline='1714908174']When I change up my setup I’ll add a bleed valve at the accumulator. The PARKER hydraulic shop I used had the bleed valves used on the rear hydraulic manifold.Those bleed valves, are they the Minimess style? Do you know what thread the manifold is? Local Parker store doesn't carry those but there will some place in Phoenix that will have them. It looks like the Parker version of the Minimess fitting is EMA3? I was able to get a Minimess to 1/4" FNPT adapter at another hydraulic supply nearby which I used to charge the system with the pump. I'm saving everything you post, keep it coming.
I decided to delay the accumulator installation until the Fall when I'll be able to do it. I'll take the pump, accumulator and switch along with us in our travels. I did add nitrogen to bring the pressure to 10 bar. That should insure that nothing will happen.
Jim
2014 Newell Coach 1482 Mid Entry 45'8" Valid Slides and Valid Levelling